For some reason, certain sounds cause the peak meter to go all the way to the right and ALL sound stops until that channel is muted. Other sounds will work just fine using the same plug in. Please help ! Thanks ...
forum Keeps stoping every ten 10 min ...
forum I have this one project where, once it gets to the breakdown (where the cursor is in the image, the peak meter just shoots up all the way into the red and all audio cuts out.
[img:2lwwn74q]https: ...
forum FL Studio 20 to a newer verision, however I ran into some problems after that. In the 64 bit version of FL Studio 20 I could no longer open the 32 bit plugins I have. Before the update they were ...
forum FL Studio and an enttec opendmx usb interface, latest drivers and all that.
I start a new project in fl, put zgameeditor visualizer as effect on a channel, go to settings and activate the enttec usb devise, check debug window ...
forum FL Studio. Then today I hooked up an Air-61, now when I swap back to the Axiom, it does nothing. Under the midi options, I don't see it appearing either. Something needs to be tweaked in settings?
I thought ...
forum FL Studio 11 Signature, recording in 192Khz/24 bit (and Focusrite Forte which seams that it interacts wonderful with FL Studio) and would be very greatful is someone could explain (my most likely faulty settings)to me.
I'm also wondering ...
forum Audio stopped working and it is not appearing at the top in the peak meter ...
forum FL studio no longer renders or plays my track due to an odd glitch. i connected my monitors to the laptop and tried to play my tracks in this process a clicking/pooping noise was presented. ever since that even when ...
forum FL studio 20.6.2.1549 The problem is, after around 5 minutes of working the audio cuts out with a crckling noise. Only the master is getting signal. I tried to change the audio input (flASIO, ASIO4ALL) but it does the same ...
forum